Automatically Adding Marks At The Position Where Recording Restarts; Starting A New Take And Continuing To Record; Manually Starting A New Take During Recording - Tascam DR-680 Owner's Manual

4 – Recording
3 Use the wheel to select the
DATA
item, and press the
4 Use the wheel to set it to
DATA
).
OFF
5 Press the key to return to selecting items.
6 Use the wheel to select the
DATA
item, and press the
7 Use the wheel to set the silence that must
DATA
be detected before recording is paused between
1–5 seconds (default value: 1 seconds).
8 When you have finished making the settings,
press the
HOME/FUNC
Screen.
9 Press the key to start recording standby.
PAUSE
When the input sound exceeds the level set in the
item, recording starts automatically.
LEVEL
When the input sound level is below the level set
in the item for a set number of seconds,
LEVEL
recording automatically pauses.
When the input sound exceeds the level set in the
item again, recording restarts automatically.
LEVEL
Automatically adding marks at the
position where recording restarts
You can set whether a mark is added or a new take is
created whenever input higher than the set auto rec
level is detected after the input level has been below
the auto rec level for one second or more.
1 Set the and
AUTO REC
2 Open the screen of selecting items.
AUTO REC
3 Use the wheel to select the
DATA
and press the key or
4 Use the wheel to set it to
DATA
32
TASCAM DR-680
S I LENT CUT
key or key.
ENTER
(default value:
ON
S I LENT DELAY
key.
key to return to the Home
as described above.
LEVEL
item,
AUTO MARK
key.
ENTER
or .
MARK TAKE
(default): Auto mark function off
OFF
: After the input level has been below the set
MARK
auto rec level for one second or more, when
input higher than the auto rec level is detected
again, a mark is added at that position. Recording
continues in the same take.
: After the input level has been below the set
TAKE
auto rec level for one second or more, when
input higher than the auto rec level is detected
again, recording continues in a new take. After
pausing because of activation of the silent cut
function, recording restarts in a new take.
5 When you have finished making the settings,
press the
HOME/FUNC
Screen.
6 Press the key to start recording standby.
PAUSE
Depending on the setting, a mark is added or
a new take is created when recording starts
automatically.
Starting a new take and continuing
to record
With this unit, the maximum recording file size is 2
GB. If the file size reaches 2 GB while recording, the
unit automatically continues recording in a new take
and stops recording the current take.
Manually starting a new take during
recording
You can manually create a new take during recording
at any time.
Press the key during recording to create a
REC
new take and continue recording.
NOTE
When a new take is created, the number at the end of
•
the take name is increased by one.
You should use a folder that contains as few takes as
•
possible when creating new takes while recording or
when expecting to do so.
The maximum number of takes in a folder is about
•
100.
key to return to the Home