Add; Edit - Tascam SX-1 Reference Manual

This key clears any value that the
ZERO CURSOR
cursor is currently selecting.
This key clears the contents of the entire
ZERO ALL
register.
Accepts the change.
ACCEPT
Declines the change.
CANCEL
This key opens the

ADD

selections to add the devices you want to control
from the SX-1:
MMC OPEN
that accept Open Loop MIDI Machine
Control Protocol to the list. This selec-
tion will be available in Version 1.5.
MMC CLOSED
devices that require Closed Loop MIDI
Machine Control Protocol to the list.
This selection will be available in Ver-
sion 1.5
This selection adds a generic P2
P2
device. Generic transport, jog/shuttle
wheel and track arming is available. With Auto
Detect on, the SX-1 will sense from the P2 connec-
tion what kind of device is present, and should
update its display accordingly.
This selection will add a DTRS tape machine
DTRS
(this family of machines includes the TASCAM DA-
88 and DA-78HR) to the list. This function will be
available in Version 1.5.
Part III–Locate, Transport, & Surround
dialog. Use these
ADD
Use this to add devices
Use this to add
Use this selection to create a device profile
ADAT
for controlling a connected ADAT. This selection will
be available in Version 1.5.
This key opens the

EDIT

This selection sets the number of
RECS
record channels that a device supports
for remote track arming.
With this selection you can
NAME
name the devices in your list.
This key opens the
CHASE MODE
log. Use these selections to specify whether the SX-1
will operate as a master or slave, and the type of time
code it will generate or recognize:
No time code is generated or
NONE
recognized.
LTC MASTER
will generate Longitudinal Time Code.
LTC SLAVE
will chase incoming Longitudinal Time
Code.
MTC MASTER
1 will send MIDI Time Code out its
MIDI Out jacks. You can select the
MIDI ports that are used to send MTC.
This parameter is found in the
screen.
Tracks
Specifies that the SX-1 will chase
MTC SLAVE
incoming MIDI Time Code at its
TASCAM SX-1 Reference Manual
dialog:
EDIT
dia-
CHASE MODE
Specifies that the SX-1
Specifies that the SX-1
Specifies that the SX-
tab of the VGA
Global
jack.
MTC IN
33