Lcd Waveform Screen; Select; Managing Audio Takes - Tascam SX-1 Reference Manual

Part VI–Audio tracks

LCD WAVEFORM Screen

This screen parallels the
Waveform
screen on the VGA.
Tracks
Press the key from the
WAVEFORM
section to reach this screen.
Allows you to scroll through your current
TRACK
project's audio tracks.
Magnify or contract the track view.
ZOOM
This menu is for choosing a type
SELECT EDIT OP
of edit operation to be performed on your selected

Managing Audio Takes

Several audio clips can be assembled (imported or
recorded) to form a take. A take is essentially a self-
contained EDL made up of a group of clips. The SX-
1 has a pool of takes associated with a project, and
the takes within this pool can be assigned to any
track of the HDR for playback (they are not fixed to
the track that they were originally assembled on).
Takes can also be imported and exported between
projects. They are managed from the
of the VGA's screen.
Tracks
124
TASCAM SX-1 Reference Manual
tab found in the
LCD ACCESS
tab
Take Browser
region. The edit operations are described on the pre-
vious pages ("Edit Operation" on page 123).
Press this key to access the

SELECT

LCD screen's additional waveform edit-
ing menu.
SINGLE EVENT Selects the audio event
at the playbar.
ADD EVENT Adds an event to the cur-
rent selection.
SINGLE TRACK
(the track that is selected with the SEL key).
ADD TRACK Adds a track to the
selected regions.
NUDGE LEFT Nudges the selected audio region ear-
lier in time (set Nudge amount on the Main Menu
Bar).
NUDGE RIGHT Nudges the selected audio region
later in time.
CLEAR Clears the current selections.
Audio takes are loaded to track slots by clicking on
the icon to the right of the
screen. Then, selecting the
from the pop up-menu reveals the takes that are
available for loading.
TIP
For step by step instructions on loading audio and MIDI
takes to tracks, see the Quick Start Guide .
Selects an entire track
key in the
Tracks
command
Load Audio Take