Fader Banks; Fader Bank Section - Tascam SX-1 Reference Manual

Fader Banks

The 16 mixer faders allow level control over all of
the SX-1's audio and MIDI channels. The faders
themselves are not hardwired to a particular channel,
but instead are able to control whatever channel to
which they are assigned (including the obvious 32
mixer inputs, sends and returns, busses, and MIDI
tracks).

Fader Bank Section

Fader banks are available as presets, or you can cre-
ate your own user-defined banks. The keys in this
section are for recalling fader banks.
Use the
BANK MODE
BANK MODE
between our preset fader banks or your own custom
fader banks. Press
BANK MODE
bank (Preset or User) you want to recall.
Indicates that the
<PRESET>
will recall the default/preset fader banks (the labels
on top of the
FADER BANK
each key's individual description).
Indicates that the
<USER>
recall the user defined fader banks (the labels at the
bottom of the
FADER BANK
Use the
1–16/HDR IN
1 - 16 /HDR IN
audio mixer channels 1 to 16 (which default to the 16
analog inputs), making sure the
LED is lit (if not, press
BANK MODE
to recall the Hard Disk Recorder inputs 1
16 /HDR IN
to 16.
TIP
The HDR IN bank always controls the master input levels
to the HDR. For example, even if the direct out from
channel 1 feeds HDR In 1, that channel's level can still
be controlled by the HDR Bank.
key to switch
and then the fader
keys
FADER BANK
keys—see below for
keys will
FADER BANK
keys).
key to recall
<USER BANK>
) and press
1 -
Part IV–Mixer Controls
All the different types of channels can be recalled to
the actual faders in "banks" of 16 at a time. These
banks are called fader banks and can be accessed
from the keys in the
FADER BANKS
SX-1's slanted front panel.
Use the
17-32/USER 1
recall audio mixer channels 17 to 32 (which, at
default, have the HDR outs routed to their inputs),
and your own custom user bank. When recalling the
User Bank, be sure the
<USER BANK>
not, press the
BANK MODE
Use the
RTN/GRP/USER 2
key to recall the audio mixer's fader groups and
Return channels, and your own custom user bank.
When recalling the User Bank, be sure the
LED is lit (if not, press the
BANK>
key).
Use the
BUSS/AUX/USER 3
key to recall the audio mixer's busses and auxiliary
3
returns, and your own custom user bank. When
recalling the User Bank, be sure the
LED is lit (if not, press the
MIDI A/USER 4 to MIDI D/USER 7
to
MIDI A/ USER 4 MIDI D/ USER 7
MIDI sequencer channels 1-16 for port A through 1-
16 for port D, and your own custom user banks.
When recalling the User Bank, be sure the
LED is lit (if not, press the
BANK>
key).
TASCAM SX-1 Reference Manual
section on the
key to
17 - 3 2 /USER 1
LED is lit (if
key).
RTN/ GRP/ USER 2
<USER
BANK MODE
BUSS/ AUX/ USER
<USER BANK>
key).
BANK MODE
Use the
keys to recall
<USER
BANK MODE
73