Vga Aux Return Masters - Tascam SX-1 Reference Manual

VGA Aux Return Masters

Master levels for the Aux Returns are reached
through the Fader Banks. To see the return levels on
the VGA, make sure the
Mixer
(press in the
MIX MAIN DISPLAY MODE
section, press
FADER BANK
the LED is on. Then press
<PRESET>
reach this screen.
screen is selected
. From the
so that
BANK MODE
to
RTN/ GRP
Part IV–Mixer Controls
TIP
Keep in mind that it's not necessary to have a
screen up just to move an aux return level. If the Aux
return fader bank has been recalled to the surface, you
can just move the faders directly on the mixer while
leaving a different screen on the display.
TASCAM SX-1 Reference Manual
Fader
67