Aux Send Masters; Lcd Aux Send Controls - Tascam SX-1 Reference Manual

Part IV–Mixer Controls

Aux Send Masters

Master levels for the Aux Sends are reached through
the Fader Banks. To see them on the VGA, make
sure the screen is selected (press
Mixer
. From the
MAIN DISPLAY MODE
section, press
BANK MODE
LED is on.
Then press to reach this screen.
BUSS/ AUX

LCD Aux Send Controls

Aux Send controls on the LCD are available directly
on the screen.
MIXER CHANNEL
66
TASCAM SX-1 Reference Manual
in the
MIX
FADER BANK
so that the
<PRESET>
TIP
Keep in mind that it's not necessary to have a
screen up just to move an Aux send level. If the Aux
send fader bank has been recalled to the surface, you
can just move the faders directly on the mixer while
leaving a different screen on the display.
Press either or
MIXER CHANNEL
section. Use the keypad's arrow
DISPLAY MODE
keys to scroll to the Aux Send field you want to
adjust. Then use the soft knobs to adjust the Aux
Sends.
Fader
in the
MAIN