Lcd Midi Settings Screen; Vga Midi Track Tab - Tascam SX-1 Reference Manual

LCD MIDI Settings Screen

This LCD screen mirrors the MIDI controls found on
the tab of the VGA
Global Track
parameters on this screen are identical to the parame-
ters found in the VGA
Global
the previous pages. Only those parameters that are
unique to this LCD screen are explained here.
To reach this screen, press the
section. Then use the
MAIN DISPLAY MODE
soft key to scroll to the
PAGE

VGA MIDI Track Tab

The tab contains controls for non-destruc-
MIDI Track
tively altering a track's MIDI performance. From the
Here, you select a MIDI track for processing.
Track
Each track can have its own unique settings for all of
the available parameters.
screen. Many of the
tab, and are explained on
key in the
SETTINGS
NEXT
page.
MIDI
Part VII–MIDI Sequencing
This allows the SX-1's
MTC INPUT PORT
port to see MIDI Time Code. Use the
IN
option if you are using a device that is sending both
MTC and MIDI performance data (notes, etc.) from
the same port.
This turns on or off MIDI Active
ACTIVE SENSE
Sensing. Turn this parameter on when you are con-
trolling a device that accepts Active Sensing. You
may want to turn off Active Sensing if: you have an
older MIDI device that does not accept Active Sense
messages and "chokes" on them, or if you find the
constant flashing of the MIDI activity indicator
annoying (or you only want to see sequencer activ-
ity). This parameter is only accessible from the LCD
screen.
This setting allows you to choose
LED MODE
whether the activity LED on the SX-1's
<MIDI>
slanted front panel responds to MIDI In data, MIDI
Out data, or both.
section, press the
MAIN DISPLAY MODE
key, then click on the
MIDI Track
TASCAM SX-1 Reference Manual
MIDI
MIDI IN
TRACK
tab.
139