Insert Presets; Lcd Routing Displays; Inserts - How They Work And How To Route Them - Tascam SX-1 Reference Manual

To reach this tab, press the

Insert Presets

key in the
ROUTING MAIN DISPLAY MODES
tion. Then click on the
Insert Presets
you configure the routing for the mixer's effect
inserts. You can have up to eight possible insert
effect presets spread across any of the mixer's 32 full
featured channels, as well as the 8 mix busses and
Master L/R buss.

LCD Routing Displays

On the LCD, there is a set of Routing screens that
parallel the VGA Routing tabs. Press the
key in the
MAIN DISPLAY MODE
screens. These routing screen choices are listed here.
ANALOG IN
ANALOG OUT
DIGITAL IN
DIGITAL OUT
OPTION CARD IN 1
OPTION CARD IN 2
OPTION CARD IN 3
OPTION CARD OUT 1
OPTION CARD OUT 2
Inserts – how they work and how to route them
The SX1 has eight inserts that can be used across the
entire mixing console. Each of the 32 inputs has an
insert point, as well as the 8 return channels and the
master L/R buss. Unlike a great many other digital
consoles, the inserts can be external as well as inter-
nal, meaning you can physically strap that pair of
1176's or BA6A's across the stereo buss if you want.
The eight inserts are completely separate from one
another, meaning that Insert 1 can be an internal
sec-
tab. From this tab,
ROUTING
section to reach these
Part IV–Mixer Controls
This field determines where the insert
Insert Send
send goes. Notice that external ports are available,
making external inserts possible.
Use this field to name your insert
User Name
preset.
This field determines where the
Insert Receive
insert's return is coming from (see "Routing Effects
Screens" on page 107 for instructions on routing
effects).
OPTION CARD OUT 3
MIXER IN
DIRECT OUT
BYPASS
LOOP BACK
BUSSES
HDR
EFFECTS
INSERT
TIP
To learn the functions of the individual routing screens,
see the definitions for the VGA equivalent tabs. These
are covered on the preceding pages.
effect processor, while Insert 2 could be an external
EQ.
Essentially, you can configure eight separate inserts,
and choose where they are applied on the Mixer and
Channel pages. You can remember how this works
by imagining eight mono effects units that you have
configured. This adds powerful functionality to the
SX1's routing abilities.
TASCAM SX-1 Reference Manual
59