Monitor Level; Solo Section; Headphones - Tascam SX-1 Reference Manual

Monitor Level

This knob controls the volume of your Studio
LEVEL
monitors.

SOLO Section

This section contains controls for the mixer's Solo
function. Pressing the
SOLO
Fader engages the solo mode for the Channel Strip's
keys.
MUTE

HEADPHONES

This section contains level and source controls for
the two separate headphone outputs found on the SX-
1's top panel.
The
PHONES 1
CTRL ROOM/ STUDIO
whether Headphone 1 receives the Control Room or
Studio mix.
Part II–Monitoring Signals and Selecting Screens
key on the Master
key selects
The
MODE Select
MODE
how the SX-1's solo function will operate. There are
three options:
When the
<PRE-FADER>
illuminated, the Pre-Fader solo feature is engaged.
This lets you solo a source at its input, before it
reaches a channel's gain stages. The pre-fader output
is sent out of the Solo buss.
When the
<IN-PLACE> <IN-PLACE>
In-Place solo feature is engaged. This feature allows
a soloed signal to retain the same settings as heard in
the main mix (this is accomplished by muting every-
thing going to the Master L/R buss except the soloed
channel).
In operating system (OS) Ver-
<USER-DEFINED>
sion 1.0. when the
<USER-DEFINED>
the solo mode monitors signal directly after the fader
(After Fader Level). Signal is fed to the Solo buss
without effects. In future OS revisions, the User-
Defined feature will be expanded to include a num-
ber of enhancements.
This [level] knob controls the level of
Solo LEVEL
the Solo buss, and hence the volume of the Solo out-
put in PFL and AFL modes (pre-fader and after-fader
levels).
This knob controls the volume for
LEVEL 1
LEVEL
Headphone 1.
This
PHONES 2
CTRL ROOM/ STUDIO
selects whether Headphone 2 receives the Control
Room or Studio mix.
This knob controls the volume for
LEVEL 2
LEVEL
Headphone 2.
TASCAM SX-1 Reference Manual
key lets you choose
LED is
<PRE- FADER>
LED is on, the
LED is on,
key
23