In Surround Mode - What Changes; On The Vga; On The Lcd - Tascam SX-1 Reference Manual

Part VIII–Data Entry, System & File Management
In Surround Mode – what changes?
If the mixing console is set to one of the surround
modes, the behavior of Mixdown mode is changed
slightly, in that the audio bounced down to the Mix-

On the VGA

In surround, the VGA
Global

On the LCD

On the LCD, just as on the VGA, the only thing that
changes in the display of surround is that the
field shows six files (in 5.1 surround)
Take Names
instead of two.
172
TASCAM SX-1 Reference Manual
tab looks like this:
Mixdown
down file originates from the surround mix busses,
not the L/R Buss.
You will notice that the Take names reflect which
speaker/surround buss the file relates to. The Mix-
down file still uses the text in the
field as its point of reference, but each individual
audio file also receives the name of its source/
destination.
From the
MAIN DISPLAY MODE
, then press the
MASTER MIXDOWN
Mixdown Base Name
section, press
soft key.