Chapter 15 - Examples Of Effect Algorithms; Categories; Common Effect Parameters - Tascam SX-1 Reference Manual

Part V–Effects
Chapter 15 – Examples of Effect Algorithms

Categories

The SX-1 comes stock with over 15 native plugin
effects. Below is a list of these effects grouped by
category:
Distortion
• Tascam Distortion
Dynamics
• Tascam Guitar Compressor
• Tascam Soft-knee
• Compressor
• Tascam DeEssor
Enhancer
• Tascam Exciter
Modeling
• Antares Mic Modeler

Common Effect Parameters

There are several effect parameters which are com-
mon to many of the plugins. How these controls
operate are always identical, even if the parameters
which they adjust, or select, are different.
TIP
Describing the common effect parameters here means
that not every parameter is explained for all effects. If
you are looking at an VGA or LCD effect screen and
don't see all the items explained next to the manual's
illustration, the missing controls are probably explained
here.
This controls the input level going to the
Input
effect plugin.
112
TASCAM SX-1 Reference Manual
• Antares Speaker Modeler
Modulation
• Tascam Chorus
• Tascam Delay
• Tascam Phaser
• Tascam Flanger
Pitch Shift
• Tascam Pitch Shifter
Reverb
• TC SX-1 Reverb
Utilities
• Tascam/Nemesys HD1 Dither
• Tascam Test Tone
This controls the wet-to-dry mix ratio of the
Mix
effect. If you are using the effect on a Return, start
with this value at 100% to avoid phasing.
This controls the output level coming from
Output
the effect plugin.
This controls the left-to-right balance
L/R Balance
of the effect plugin's output.
Press this key to compare your current
COMPARE
settings with your last saved settings.
Press this key to bypass the effect. In the
BYPASS
case of an insert, the source signal will pass through
the plugin without being effected (remaining com-
pletely dry).