Lcd Time Screen; About Your Sx-1 - Tascam SX-1 Reference Manual

Part VIII–Data Entry, System & File Management
Press on the Keypad. Then, from the
SHIFT
section, press
DISPLAY MODE
and use the (or
NEXT PAGE PREV PAGE
to the screen.
MISC
Allows you to set the foot pedal
FOOT PEDAL
jack's operation to
Normally Open
FOOT PEDAL ASSIGN
the footswitch function.
NOTE
The foot pedal's default operation is as a punch-in
pedal for recording. In future versions it will have
expanded capabilities
Here, you can set the amount of
REG DIM LEVEL
level attenuation (–50 to –3dB) for the
the section.
CONTROL ROOM
Use this control to set the amount
TB DIM LEVEL
of Main Output level attenuation (–50 to –3dB) asso-

LCD Time Screen

Everything you do on the SX-1 is time and date
stamped. This is essential for event history and undo/
redo operations. Use this screen to set the SX-1's
internal time.

About your SX-1

There are no editable parameters on this screen—it
simply provides information about some of the SX-1
hardware components.
184
TASCAM SX-1 Reference Manual
MAIN
,
SETTINGS/ PREFS
) soft key to scroll
or .
Normally Closed
Allows the assignment of
key of
DIM
ciated with the
TALKBACK
section.
Use this parameter to adjust the
CTL ATT LEVEL
starting level for the Control Room outs. The default
of is equivalent to +4 dBu.
0
Use this parameter to adjust the
ST ATT LEVEL
starting level for the Studio outs. Again, the default
value of is equivalent to +4dBu.
0
Adjusts the touch-sensitiv-
FADER SENSITIVITY
ity of the faders. The values are expressed in scan
cycles, with higher values denoting faster (and there-
fore more accurate) scanning of the faders.
Note that the SX-1 faders' touch-sensitivity depends
somewhat on the environment; chiefly temperature
and humidity, and body pH—as these all affect con-
ductivity.
VGA REFRESH RATE
VGA screen's sync rate (60 to 87 Hz).
Press on the Keypad. Then, from the
SHIFT
section, press
DISPLAY MODE
and use the (or
NEXT PAGE PREV PAGE
to the screen.
TIME
Once you have adjusted the time and
SET TIME
date, press this soft key to set the SX-1's internal
clock.
SELECT MONTH and SELECT HOUR
this soft knob to adjust the month or hour, depending
on the field that is selected.
SELECT DAY and SELECT MINUTE
soft knob to adjust the day or minute, depending on
the field that is selected.
SELECT YEAR and SELECT SECOND
this soft knob to adjust the year or second, depending
on the field that is selected.
key of the
STUDIO
Use this dial to select your
MAIN
SETTINGS/ PREFS
) soft key to scroll
Turn
Turn this
Turn
,