Init Edit - Tascam SX-1 Reference Manual

Part IV–Mixer Controls

Init Edit

The Initial Status of a control is its value before the
first dynamic mix move present. Until dynamic mix
moves are written to a control, there is no difference
between the Initial Status of a control and its position
were it set to Static. When dynamic mix moves are
written to a control, and the controller is in Auto, the
+12
+6
+3
0
-3
-6
-12
Initial Status
Once a control contains dynamic automation data,
any new mix moves written to that control will be
dynamic mix moves as well. If it becomes necessary
to alter a control's starting point (Initial Status)
82
TASCAM SX-1 Reference Manual
1 sec
2 sec 3 sec 4 sec
Dynamic Data
controller becomes dynamic. Any change to the mix
data on such a control takes into account both its Ini-
tial Status and any dynamic automation. The illustra-
tion below shows what Initial Status looks like with
respect to dynamic automation data.
7 sec
5 sec 6 sec 8 sec
before the first dynamic move written, Init Edit is
used.
The Initial Event Ramp Time allows a smooth match
between the new initial value, and the previous
dynamic automation data.