Lcd Channel Screen; Automation Events & History Screens; Event List Tab; Edit Operation - Tascam SX-1 Reference Manual

LCD CHANNEL screen

This screen is the equivalent of the upper left corner
of the VGA screen, where the same choices are also
available.
On this screen you can define the type of automation
assigned to each controller of your selected mixer
channel. This screen also comes in handy as an over-
view of a channel's automation state.
Automation Events & History Screens
The tab allows offline editing of the selected
Event List
track's automation data.

Event List Tab

From the screen, click on the
AUTOMATION
tab. Here you can see any automation events for all
controls on the selected channel or effect plug-in.
Keyboard and control surface editing is also possible
on selected events.
Click on the arrow to select the

Edit Operation

type of edit operation you want to perform on the
selected events. The choices are:
Here the numerical keypad's cursor keys are used to
move the cursor to the various choices. Pressing the
numerical keypad's
ing the
SET
From the
AUTOMATION
reach this screen.
ALL CHANS
same control across all mixer channels.
ALL CNTRLS
the controls on the selected channel.
Use this button to execute your selection.
SET
The
History
and is the same as viewing this tab in other screens.
Insert Library Entry Recall
Event List
allows you to store the recall of a library entry as an
automation event. You can define which library (EQ
or Dynamics) an individual preset is recalled from,
and where the recall event will be inserted. You can
also select a different transition time for each auto-
mated recall.
Event Editor
for modifying the time stamp of the automation or
modifying the time and value of the event. It is also
possible to modify the control's Initial Value.
Part IV–Mixer Controls
key is the same as press-
ENTER
soft key.
MAIN DISPLAY MODES
and then the
CHANNEL
Use this button to assign a State to the
Use this button to assign a State to all
tab shows the SX-1's global undo history
This operation
This operation provides a register
TASCAM SX-1 Reference Manual
section, press
soft key to
91