Loop Section; Auto Record Controls (Autopunch Section)37 - Tascam SX-1 Reference Manual

LOOP Section

Tracks can be looped during playback, rehearsal, and
recording. The keys for setting the loop are found in
this section.
Press the
ENABLED
ENABLED
playback.
Auto Record Controls (AUTOPUNCH Section)
The keys in this section are for setting the automatic
punch in and out recording points.
NOTE
It is important to note that once Autopunch is enabled,
it is not necessary to press the transport's RECORD
key, as the SX-1 will automatically drop into record
when the transport passes the Autopunch In point.
When Autopunch is enabled, the transport's RECORD
key flashes as an additional indication.
ENABLED/ALL INPUT
] key to activate Autopunch mode, and
INPUT
+
SHIFT ENABLED/ ALL INPUT
Input monitor mode during Autopunch.
Use the
IN/EDIT IN
IN/ EDIT IN
Autopunch input point, and
fine-tune the Autopunch input point.
Part III–Locate, Transport, & Surround
key to activate loop
Press the
ENABLED/ ALL
to activate the All
key to store the
+ to
SHIFT IN/ EDIT IN
After using
FROM/EDIT FROM
grab a time value, use the
store the loop start point, and
to adjust the loop start point.
FROM
After using
TO/EDIT TO
value, use the
TO/EDIT TO
end point, and +
SHIFT TO/EDIT TO
end point.
TIP
Use the CAPTURE key in conjunction with the FROM/
EDIT FROM and TO/EDIT TO keys to set the loop
points. Press CAPTURE and then the key for the loop
point you want to set.
After using
OUT/EDIT OUT
time value, use the
OUT/ EDIT OUT
Autopunch output point, and
to fine tune the Autopunch output point.
OUT
TIP
Use the CAPTURE key in conjunction with the IN/
EDIT IN and OUT/ EDIT OUT keys to set the
Autopunch points. Press CAPTURE and then the key
for the Autopunch point you want to set.
REHEARSAL/AUTO MON
REHEARSAL/ AUTO MON
tice the Autopunch without actually recording. Press-
ing +
SHIFT REHEARSAL/ AUTO MON
Input monitoring during an autopunch when the
Rehearsal mode is active.
TASCAM SX-1 Reference Manual
to
CAPTURE
key to
FROM/EDIT FROM
+
SHIFT FROM / EDIT
to grab a time
CAPTURE
key to capture the loop
to adjust the loop
to grab a
CAPTURE
key to store the
+
SHIFT OUT/ EDIT
Pressing the
key allows you to prac-
enables All
37