Lcd New Project Screen; Manage Project Screens; Vga Manage Project Tab - Tascam SX-1 Reference Manual

LCD New Project Screen

This LCD screen reflects the New Project parameters
found on the tab of the VGA
New Project
Most of the parameters found on this screen are iden-
tical to the parameters found in the VGA
tab and are explained on the previous pages. Only
those parameters that are unique to this LCD screen
are explained here.

Manage Project screens

The Manage Projects screens are where you load,
copy, and delete projects on your current disk vol-
ume.

VGA Manage Project Tab

From the
MAIN DISPLAY MODE
to reach the
PROJECT
PROJECT
the tab.
Manage Projects
This field displays the name of the currently
Name
selected project.
Part VIII–Data Entry, System & File Management
screen.
Project
New Project
section, press
screen. Then click on
From the
MAIN DISPLAY MODE
, then press the
PROJECT
After you have named your new
Create Project
project and selected a sample rate, press this soft key
to write the new project file to disk.
Loads the project selected in the list.
LOAD
This key copies the selected project into a
COPY
new file with a new name. The audio files are only
copied when copying the project to a different drive
or when backing up. See the section "The SX-1 and
Hard Drives" on page 175.
Lets you rename the selected project.
RENAME
Deletes the project selected in the list.
DELETE
Cleans up all currently-mounted disks
CLEANUP
by going through the projects, and checking to see
what clips are referenced by the projects on the disks.
Any unreferenced clip files are deleted. If only part
of a clip is used, the whole clip will be kept on disk.
Files in the Import folder will not be cleaned up in
this way.
TASCAM SX-1 Reference Manual
section, press
soft key.
New
167