History Tab; Vga Automation Global Tab; Dynamic Automation - Tascam SX-1 Reference Manual

Part IV–Mixer Controls
NOTE
If a fader's (or other continuous controller's) Initial
Value is modified in this way, an Initial Event Ramp
Time will not be applied. Unlike an Init Edit, controls
that have had their Initial Value modified in this way
can have that modification reversed by the Undo
command.
Allows you to nudge, by the amount into the
Move
field, the selected automation events.
Amount
Render Library Recalls
ter changes which will be performed when a library
entry is recalled to be split into a series of automation
events. This can be useful when a mix started out
containing library recalls, that later requires dynamic
automation.

History Tab

The tab accesses the SX-1's global history list.
History
It shows the same information that is displayed in the
tab for any screen (essentially, it is the same
History
tab).

VGA Automation Global Tab

Dynamic Automation

Engine. The default value of this control is ON,
allowing all control settings within a project to be
Static automation data and to be stored within a mix.
92
TASCAM SX-1 Reference Manual
This allows the parame-
Enables the Automation
Use this function to smooth out
Smooth Events
the movements of controls and/or to create average
values of detailed control movements. You may want
to use this when sharp control movements are too
audible.
When depressed, the event list follows the
SCROLL
playhead (it scrolls). When not depressed, the event
list does not follow the playhead.
Event Display Filters
you do not want to view for the selected mixer chan-
nel or effect plug-in. For example, if the channel has
many fader moves and you only need to see Mute
events, uncheck Fader Level to hide those events
from view.
From the screen, click on the
AUTOMATION
If this is turned off at the beginning of a project and
then later turned on, all controls will snap to the
default values for a new project since their values in
the Mix would not have been updated.
Selects the type of control
tab.
History