Groups; Vga Fader Groups; Lcd Fader Groups - Tascam SX-1 Reference Manual

Groups

It's possible to group any of the mixer channels
(including aux, effect sends, busses, and MIDI chan-

VGA Fader Groups

The module of the
GROUPS
direct control over the selected channel's associated
fader groups.
Press in the
CHANNEL MAIN DISPLAY MODES
tion to find this module. From here you can add and
delete master and slave faders.

LCD Fader Groups

The screens'
GROUPS/LINKS
module on the VGA Channel screen.
GROUPS
screen gives you
CHANNEL
sec-
page parallels the
GROUPS
Part IV–Mixer Controls
nel faders) in two different ways, as stereo pairs or
groups containing master and slave faders.
This window displays the master fader
Master
associated with the selected channel.
This window displays the slave faders asso-
Slaves
ciated with the selected channel.
Press the key to select the type of fader you
Add
want to add as either a Master or Slave.
Dissolves the group when the group
DISSOLVE
master is selected.
Removes the selected Slave fader from the
DELETE
window.
Slaves
TIP
Step by step instructions for creating a slave group con-
trolled by a Group Master fader are given below.
From the section, press the
LCD ACCESS
key to reach the
LINKS GROUPS/LINKS
press the soft key to reach the
GROUPS
Allows you to select faders for editing. For
SELECT
example, several faders can be simultaneously high-
lighted and removed.
Allows you to jump between a project's dif-
JUMP
ferent fader groups.
Allows you to name your Fader
EDIT NAME
Groups. This feature is unique to the LCD screen and
is not reflected in the VGA's
TASCAM SX-1 Reference Manual
GROUPS/
screen. Then
page.
GROUPS
module.
GROUPS
71