Routing Effect Examples; Aux Send & Return; Inserting An Effect - Tascam SX-1 Reference Manual

Routing Effect Examples

Below are step by step instructions for patching an
effect plugin into your mix. Both routing a plugin to
Aux Send & Return
Go to the VGA
1
Effects
Reverb on quadrant 1 (the
Using the
2
Input Routing
field, select Aux Send 1 as the left
Effect Slot
input. Select Aux Send 2 as the right input.
Using the
3
Output Routing
left output to Return 1, and the reverb's right
output to Return 2.
On the screen, select the Return/Group
4
Mixer
Fader Bank (press MIXER from the MAIN

Inserting an Effect

Go to the VGA
1
Effects
Reverb on quadrant 1 (the
Go to the VGA
2
Routing
tab. In the
Insert Preset
type in the name
Reverb
board to enter the text and then press
[RETURN].
From the pull down menu for Insert
3
Insert Send
1, select
Effect/TC Reverb Left In
From the
4
Insert Receive
Insert 1, select
Effect/TC Reverb Left Out
screen and add a TC
field).
Effect Slot
field to the right of the
field, send the reverb's
screen and add a TC
field).
Effect Slot
screen and select the
field for ,
User Name Insert 1
. Use the PS/2 key-
.
pull down menu for
.
Aux Sends and Returns and inserting directly on a
channel are covered.
DISPLAY MODE, then press RTN/ GRP in the
LCD ACCESS section) and make sure that
Returns 1 and 2 are assigned to the L/R Buss. If
they are not linked, press the
return channel.
Select the fader bank for a channel that has
5
audio playing back, and raise the level on
Aux sends 1 and 2 until you can hear the
reverb. That's it—repeat these steps to assign
an effect to the other quadrants.
Go to the VGA
5
Mixer
on the key of the channel you want
FX INSERT
to use. From the menu that appears, select
as the insert you would like to
Insert 1 (Reverb)
use.
Left-click on the Insert
6
Insert 1. You should now hear the TC Reverb
on the inserted channel when you press
. That's it—repeat these steps to insert
PLAY
an effect on other channels.
TASCAM SX-1 Reference Manual
Part V–Effects
key on either
Link
screen, and right-click
to enable
FX INSERT
111