Chapter 12 - Fader Links, Groups, & Banks; Links; Vga Fader Links; Lcd Fader Links - Tascam SX-1 Reference Manual

Chapter 12 – Fader Links, Groups, & Banks

Links

It's possible to link any (including aux, effect sends,
busses, and MIDI channel faders) odd-numbered
mixer channel with its adjacent, even-numbered
channel to form a stereo pair. This feature can be
accessed from the VGA (whenever you see a

VGA Fader Links

The Link feature can be accessed from the
module in the screen. It is also available
CHANNEL
directly on the channels shown in the
This is an example of the
LINK
key in the
CONTROL
lar in appearance to the
LINK
channels in the screens.
MIXER
Press the key to gang the selected channel with
LINK
an adjacent channel (the next even channel if the
selected channel is odd, and the previous odd channel

LCD Fader Links

From the section, press the
LCD ACCESS
key to reach the
LINKS GROUPS/LINKS
press the soft key to reach the
LINKS
LINK
CONTROL
screens.
MIXER
LINK
module. It is simi-
keys found on the mixer
GROUPS/
screen. Then
page.
LINKS
Part IV–Mixer Controls
key), the LCD (from the
GROUPS/LINKS
simply by pressing the
SEL
channels simultaneously (this move lets you quickly
link and unlink channels).
if the selected channel is even). The
blue when active.
TIP
Right-click on the arrow to view the channel ele-
LINK
ments you would like to link: aux send, dynamics, EQ,
faders, trim/delay, stereo pan, and cue pan. This tech-
nique also works for the channels in the
When two channels are linked in this way, the settings
of the channel whose
LINK
to the other linked channel.
From this screen you can turn links on and
LINKS
off, and control which parameters (such as EQ, aux
sends, and pan) of each channel are actually linked.
TASCAM SX-1 Reference Manual
screen), or
keys for two adjacent
key glows
LINK
screens.
Mixer
key is clicked are transferred
69