Tascam SX-1 Reference Manual page 130

Part VI–Audio tracks
This key is for MIDI editing only. Use
MERGE
to combine two different MIDI regions (the
MERGE
contents of the clipboard and a region equal to the
Region 1
Region 2
Audio After Merge
Ripple is a mode where data
RIPPLE/REV RIPPLE
is moved during an edit operation, either to fill the
gap created by a Clear or Cut, or to move out of the
way for a Paste command. Ripple moves events later
in time, while Reverse Ripple moves events earlier in
time.
Use the
RIPPLE/ REV RIPPLE
for the Cut, Paste, Split, and Clear edit commands.
Audio Before Paste Ripple
Audio After Paste Ripple
Audio Before Reverse Paste Ripple
Audio After Reverse Paste Ripple
Use the key to revert to the project's
UNDO
UNDO
state just before your last edit or record move.
Use the key to revert the last Undo
REDO
REDO
move.
TIP
In the VGA, click on the
History
sion's previous recording and editing moves.
130
TASCAM SX-1 Reference Manual
Selected Region
In
In
key to enable rippling
In
Pasted From Clipboard
Pasted From Clipboard
tab to view all of the ses-
length of the clipboard's selection after the paste In
point).
Out
Merged Region
Press this key and its LED will light to indicate that
all subsequent edits will be rippled. For example,
with Ripple enabled, all material pasted from the
clipboard will be inserted at the In point and the orig-
inal material after the In point will move later in
time. Pressing +
SHIFT RIPPLE/REV RIPPLE
the rippled data to the left.
Clipboard
In
Press this key to jump to the
SELECT
LCD screen (pictured here). This screen mirrors the
controls of the tab's
Waveform
(explained in "HyperSelect" on page 160), an item of
the menu. Use these controls to select
Edit Operation
multiple audio events that conform to HyperSelect's
Out
moves
Clipboard
HyperSelect
command
HyperSelect