Vga Edit Menu - Tascam SX-1 Reference Manual

rules (for example, you could select all audio events
after bar 108).
Press the
BEGIN/EDIT BEGIN
key to define the In marker for an edit region.
BEGIN
Press +
SHIFT BEGIN/ EDIT BEGIN
Begin point.

VGA Edit Menu

Audio Before Open Area
Audio After Open Area
Select All Selects all tracks.
Select All Audio Selects all audio tracks.
Select All MIDI Selects all MIDI tracks.
Select All Automation Selects all automation
tracks.
Unselect All Deselects all selected tracks, regions,
and events.
BEGIN/ EDIT
to adjust the edit
An expanded edit
command menu is
available from the
VGA's Main Menu
Bar. Along with all
the previously
explained editing
operations, there
are several unique
editing commands
found only on this
menu.
The commands
that are unique to
this menu are
explained here.
Selected Region
In
In (of Selected Region)
Opened Area
Part VI–Audio tracks
TIP
Remember, In and Out edit points must be defined
before you can edit a region. Use the CAPTURE key
(explained in "Creating Locate Points" on page 38) to
capture edit points on the fly.
Press the
END/EDIT END
define the Out marker for an edit region. Press
+
SHIFT BEGIN/ EDIT END
point.
SYNC PT/EDIT SYNC
key to mark a location for that event that all
SYNC
edits will align to. Press
SHIFT
to edit the position of the sync point.
SYNC
Cut (Ripple Left) Functions like Cut+Reverse
Ripple.
Cut (Ripple Right) Functions like Cut+Ripple.
Paste (Insert) Functions like Paste+Ripple.
Paste (Overwrite) Pastes from the clipboard and
overwrites the area beneath the newly pasted region.
Paste (Merge) This is for MIDI editing only. Use
to combine the contents of the clipboard with
Merge
pre-existing data on a track.
Open Area This operation creates a gap that is equal
to the duration of the selected region, by moving all
of the track's material past the region's In point later
in time (see the illustration below).
Out
Toggle Grid Turns the "snap-to-grid" function on
and off (works exactly the same as the Grid Select
key described on "Grid Select" on page 18).
TIP
For quick PS/2 keyboard access to these editing func-
tions, note the keyboard commands listed on the far
right of the pull-down menu.
TASCAM SX-1 Reference Manual
key to
END/ EDIT END
to adjust the edit end
Press the
SYNC PT/ EDIT
+
SYNC PT/ EDIT
131