Part VII–MIDI Sequencing
MIDI Monitoring
The
screens are recalled by pressing the
Overview
key in the
OVERVIEW
MAIN DISPLAY MODE
tion, and then clicking on the corresponding tab for
MIDI Overview Screen
This tab displays all the MIDI activity being output
by the SX-1's sequencer.
TIP
If a MIDI module is not responding and you're not sure
why, one of the Overview screen's
great way of verifying that the SX-1 sequencer is out-
putting MIDI data on the proper channels. Other trou-
152
TASCAM SX-1 Reference Manual
sec-
tabs is a
MIDI Out
the overview you want to see. These screens show all
the signals running through the mixer at a glance.
bleshooting tips would include using the keyboard on
the Piano Roll tab to see if notes were registering, and
using the MIDI LED to ascertain whether or not MIDI is
leaving the SX-1.