Global Controls; Mix Displays; Vga Mix Tab - Tascam SX-1 Reference Manual

Part IV–Mixer Controls

Global Controls

The Global screen houses parameters for defining
how automation will operate in the current project.

Mix Displays

The SX-1 has the ability to save multiple discrete
Mixes for a single project. These Mixes contain a
large amount of data, such as which takes are loaded,
processing parameters, routing and stereo links in

VGA Mix Tab

From the screen, press the
AUTOMATION
you can name, save, and recall mixes.
Highlight the mix to be loaded or deleted in the
field, and press the or
LOAD
ate. In the case of a delete operation, a confirmation
dialog is shown.
When a mix is highlighted, it may be renamed by
entering a new name into the
84
TASCAM SX-1 Reference Manual
tab. Here,
Mix
Mix
button as appropri-
DELETE
field.
Name
addition to the actual automation data. The
the screen is where these Mixes are
Automation
managed.
Press this key to save your current mix.
KEEP MIX
Pressing and the
SHIFT TOUCH/ KEEP
same thing from the control surface.
Using , whether from the VGA interface
KEEP MIX
or from the control surface, will save the current mix
(adding an incremented numerical value), allowing
further mixing to be done while maintaining the
option to go back to a previous version.
tab in
Mix
key does the