Quantize; Randomize Duration; Randomize Time; Randomize Velocity - Tascam SX-1 Reference Manual

Quantize

This is a destructive quantize. That is, it writes quan-
tize changes directly to the MIDI performance. For a

Randomize Duration

This operation allows the SX-1 to randomly vary the
duration of selected notes.

Randomize Time

This operation allows the SX-1 to randomly vary the
timing of selected notes.
This field determines the maximum
Maximum
allowable amount of variance.

Randomize Velocity

This operation allows the randomization of selected
MIDI note velocities.
Use this slider to determine the
Base Velocity
selected notes' initial velocities.

Repeat Selection

This operation allows the selection to be repeated a
specified number of times. Repeats are pasted
sequentially, end to end.
This field determines the number of repeats.
Count

Reverse

This operation takes the selected area or event and
reverses it.

Set Duration

This operation sets the duration of all selected notes
to a single value.

Set Min/Max Duration

This operation lets you set floor and ceiling values
for MIDI note durations.
This field determines the
Minimum Duration
smallest (shortest) value desired for the selection's
note durations.
Part VII–MIDI Sequencing
more detailed discussion of the quantize parameters,
see "Quantize Controls" on page 140.
The percentage of time that the
Randomize %
notes' durations will be randomized.
This field lets you set a strength
Randomize %
percentage.
Randomize End Times
note durations.
This slider determines the percentage
Randomize
of variance.
This field allows the selection of Note
Apply To
On, Note Off, or Both as possible targets for the ran-
domization process.
Leave this box unchecked if you
Merge Events
would like the repeats to overwrite pre-existing data.
Check this box if you would like the repeats to be
merged with pre-existing data.
This field determines the selected notes'
Duration
length.
Maximum Duration
largest (longest) value desired for the selection's note
duration.
TASCAM SX-1 Reference Manual
Check this box to vary
This field determines the
161