Macro; Buss Assign; Aux Sends & Returns; Vga Aux Send Controls - Tascam SX-1 Reference Manual

CH 1-16 and CH 17-32
set up in two groups of 16 channels each. These keys
select the channels you want to view.
These "macro" commands

MACRO

allow busses on all the channels to be
turned on or off at the press of a single
soft key.
1-8/ALL OFF Turns any of the eight ste-
reo busses that are on, off (does not
include the Cue buss).
ST/ALL OFF Unassigns all of the mixer channels
from going to the stereo Master L/R buss.
ST/ALL ON Assigns all of the mixer channels to the
Master L/R buss.

Buss Assign

key to open the buss select menu for the
selected mixer channel. (Select the
mixer channel by pressing
channel in question, or by using the Left/
Right arrow keys of the Keypad).
1-2 to 7-8 These keys assign the
selected mixer channel to their respec-
tive busses.
Aux Sends & Returns
The mixer features six Aux Sends and eight Returns.
The Aux Send controls are available from the sur-
face, the VGA, and the LCD screens. Aux sends can
be routed internally, or externally to the four Aux
Send jacks on the top panel (and, for that matter, any

VGA Aux Send Controls

Aux send levels can be controlled
from the VGA
AUX SEND
MIXER CHANNEL
trols (pictured left) are also found
on the channels in the
All 6 Aux Sends are also part of the
Virtual Channel Strip for each
channel.
The bussing pages are
Press the soft
Buss Assign
on the
SEL
screen in the
Channel
module and from the LCD
page. Identical con-
screen.
Mixer
Part IV–Mixer Controls
CUE This key assigns the selected mixer channel to
the Cue output.
ST This key assigns the selected mixer channel to the
Master L/R output.
This screen shows the return assignments,
RET 1-8
as well as the assignment of the busses to the stereo
buss.
other external jack using the SX-1's flexible routing).
The Returns can accept input from nearly any source,
internal or external. Routing for the Returns is con-
figured in the
Mixer Routing
screen.
TASCAM SX-1 Reference Manual
tab of the VGA
Routing
65