Tascam SX-1 Reference Manual page 156

Part VII–MIDI Sequencing
The first mode consists of a pencil
Pencil Tool
tool. The Pencil Tool can draw MIDI Continuous
Controller events on the
Piano Roll
events on the VGA screen.
Automation
This next example below is from the
the screen. The bar at the bottom of the screen
Tracks
is currently displaying MIDI Note On velocity.
156
TASCAM SX-1 Reference Manual
tab or Automation
tab on
Piano Roll
The example below is of the
tab. The pencil tool has been used to draw in a
Track
number of curves for the kick drum's fader to follow.
Using the pencil tool, the Note On Velocities of all
the notes have been drawn in.
screen's
Automation Auto