Editing - Tascam SX-1 Reference Manual

Part VI–Audio tracks
VGA that is accessed from the
Menu Bar.
Sets the time format for the
SMPTE FORMAT
registers. The choices are: SMPTE,
REGION
hours:minutes:seconds, bars:beats:ticks, feet:frames,
or samples

Editing

TIP
Before you can perform an edit, you must first select an
event to modify. If you need to create an event, simply
drag across a track with the mouse and hit the
Alternatively, create the
Edit Begin
the key and then select
Capture
Audio Before Cut
Audio After Cut
Use to send the selected region to the
COPY
COPY
clipboard. The clipboard contents (the copied region)
can then be pasted to a new location.
Audio Before Copy
Audio After Copy
Clipboard
128
TASCAM SX-1 Reference Manual
menu of the Main
SX-1
EDIT
key.
Split
and points with
End
.
Split
Selected Region
Clipboard
Selected Region
In
Copied Region
Sets the highlighted parameter
SET TO DEFAULT
back to its factory default value.
NUDGE LEFT & NUDGE RIGHT
keys let you move your selected region forward or
backward in time by the nudge amount given in the
field and the Nudge type set in the
NUDGE SETTING
field.
Nudge Mode
Use to remove a selected region. A gap is
CUT
CUT
left between the Edit In and Out points, and the cut
contents are placed in the SX-1's temporary clip-
board.
Out
These soft