Midi; Editing; Transport And Data Entry - Tascam SX-1 Quick Start Manual

MIDI

A MIDI REC MODE
SX-1's Step mode and MIDI Merge function. Just
beneath the
MIDI REC MODE
ton for resetting stuck MIDI devices. See the
Owner's Manual for more information about MIDI
Recording.

Editing

B EDITING For all your audio waveform and
MIDI note editing needs, there is the
tion. Here you will find basic cut, copy, and paste
commands, as well as many other advanced editing

Transport and Data Entry

C TRANSPORT Though this area is not actually
labeled on the SX-1, that title best
Transport
describes this section of the SX-1's face. Here you
will find a set of standard transport keys (play, stop,
record, fast forward, rewind, end jump, and begin-
ning jump). Just above the transport keys are controls
for capturing and recalling locate points.
The SX-1 has many advanced transport functions
(including looping, user definable post/pre roll times,
and auto punch). As well, the Jog/Shuttle wheel is
handy for jogging, scrubbing, and shuttling. To learn
This section accesses the
section is a but-
PANIC
sec-
EDITING
Chapter 6 –Taking Control
NOTE
The PANIC key is a latching-type key. Press once to
enable panic mode (the indicator pulses) and again to
disable panic mode.
commands (such as, ripple, crop, and split). To learn
more about the SX-1's extensive audio waveform and
MIDI editing capabilities, see the Owner's Manual.
more about these advanced features, see the Owner's
Manual.
D DATA ENTRY The numeric keypad is labeled
. Keys on the numeric keypad are used
DATA ENTRY
for entering numbers (and letters) directly into
onscreen fields, enabling shifted functions and spe-
cial key commands (see "Multi-Function Keys" on
page 9), up/down and left/right cursor navigation,
and entering MIDI step record note values (see the
Owner's Manual for more on the
section).
TASCAM SX-1 Quick Start Guide
DATA ENTRY
27