Attaching The Second Phone Line; Unpacking; Installing The Second Phone Line Module - Muratec MFX-2500 Field Engineering Manual

Second phone line

6.8.1 Attaching the second phone line

6.8.1.1 Unpacking

Included in the second phone line kit's carton box:
Y
NCU PCB ........................................................................... 1
Y
Modem PCB ....................................................................... 1
Y
Connection cable (60P: with ferrite core) ........................... 1
Y
Connection harness 1 (13P: orange).................................. 1
Y
Connection harness 2 (14P: yellow)................................... 1
Y
Spacers (long) .................................................................... 2
Y
Spacers (short) ................................................................... 2
Y
PCB brackets...................................................................... 2
Y
Cable clamp........................................................................ 1
Y
Insulator.............................................................................. 1
Y
Screws................................................................................ 7
Y
Operating instructions (includes setting-up instructions).... 1

6.8.1.2 Installing the Second phone line module

1. Turn the machine off and unplug the power cord and telephone line cord.
2. Remove the rear cover (upper).
3. Remove the upper cover, and then remove the shield box.
4. Use cutting pliers to gently punch out the perforated panel of the "EXTENSION LINE" and "EXTENSION
PHONE" on the panel sheet.
Upper cover
6-89
Shield box
Options