Muratec MFX-2500 Field Engineering Manual page 290

Reassemble the platen cover assembly:
1. Mount the platen cover assembly on the machine.
2. Insert the Hinge spacer into the right hole.
Note: The number (1, 2 or 3) on the hinge spacer that you wrote down before disassemble the platen
cover assembly should be shown.
3. Pull the left side of the platen cover assembly to frontward to hook the pin. And attach the screw
loosely.
4. Push the right side of the platen cover assembly to backward to fix the position of platen cover
assembly. And secure the right side of platen cover assembly with a screw.
5. Secure the left side of the platen cover assembly.
Hinge spacer
5-33
Pin