Muratec MFX-2500 Field Engineering Manual page 385

Large Capacity Cassette
1. Paper take-up from Lift 1
A. After Lift 1 has completed its lifting motion, Paper Take-Up Roll 1 is driven to take up and feed a sheet
of paper until the paper blocks Paper Standby Position Sensor S1.
This serves as the standby position of the paper.
Paper standby position sensor S1
Paper take-up roll 1
Lift 2
B. When a Paper Take-Up signal is received from the machine, the Separator/Feed Rolls and Paper Take-
Up Roll 1 are driven to transport the paper up to Registration Sensor RSEN. After RSEN has been
blocked, the paper is transported a little further to reach the Vertical Transport Roller, plus form a
registration loop, before being brought to a stop.
Lift 2
Registration sensor RSEN
Lift 1
Paper take-up roll 1
6-31
Vertical transport roller
Paper standby position sensor S1
Lift 1
Options
Separator/Feed roll