5.2.19 Feed roller assembly
1. Remove the platen cover assembly. (See 5.2.17.)
2. Remove the platen top cover. (See 5.2.9.)
3. Remove the Tx side cover. (See 5.2.10.)
4. Remove the document mount assembly (See 5.2.18.)
5. Remove the ADF motor bracket. (See step 4 of 5.2.14.)
6. Remove the Feed pulley A, Gear 25 and Gear 30. (See step 5 to 7 of 5.2.14.)
7. Remove the Inner guide A assembly. (See 5.2.15)
8. Remove one screw on the bottom side and 15 screws on the upper side of the platen cover assembly.
Then separate the ADF section from the platen cover assembly.
5-35