Muratec MFX-2500 Field Engineering Manual page 269

2. Using a soft cloth dampened with alcohol, wipe the Comb Electrode.
Notes:
Make sure the alcohol does not touch the surface of the Image Transfer Roller.
When wiping the Comb Electrode, make sure the cloth is not caught by the ends of the combs.
(3) Cleaning of the Pre-Image Transfer Guide Plate
1. Open the Side Cover.
2. Using a soft cloth dampened with alcohol, wipe the Pre-Image Transfer Guide Plate.
NOTE
Make sure the alcohol does not touch the surface of the Image Transfer Roller.
(4) Replacement of the Ozone Filter
1. Remove the Rear Lower Cover.
2. Pull out the Ozone Filter and replace it.
5-12