Optional handset
6.2.1 Attaching the optional handset
Here is how to attach the handset.
1. Remove the two screw caps.
2. Using a Phillips-head screwdriver, attach the cord holder and the handset cradle to the left side of your
machine, with the screws included with the cradle.
3. Plug one end of the handset cord (it's curled) into the PHONE1 jack on the rear of your machine.
4. Plug the other end of the handset cord into the jack on the handset. If connected to a phone line, your
machine is now "off-hook."
5. Place the telephone handset onto the handset cradle. The cradle will press the handset's "flash" button,
hanging up the handset.
Note: Make the curled cord to be held with the cord holder as shown at right.
6.2.2 Adjusting handset
The small switches on the side of your machine's handset adjust the ringer volume and the receiver
volume.
Ringer Volume Control — Adjust the ringer volume to one of three settings:
High, Medium, or Low.
Hearing Volume Control — If you are hard to hear the remote person's voice, adjust the receiver volume
to one of three settings; High, Medium, or Low.
Ringer
Volume
Hearing
Volume
6-5
Options