Muratec MFX-2500 Field Engineering Manual page 405
Hide thumbs
Also See for MFX-2500:
- Operating instructions manual (208 pages) ,
- User manual (102 pages) ,
- Specifications (1 page)
Table of Contents
Advertisement
Large Capacity Cassette
6.5.3.1.2 Types of Misfeed and Misfeed Detection Timings
Type
Paper left
Lift 1 paper take-up failure
detection
Lift 2 paper take-up failure
detection
Registration Sensor paper
leading edge detection
Registration Sensor paper
trailing edge detection
Vertical transport paper
leading edge detection
Size error detection
* The detection described on
the right is also made during
a 2-sided copy cycle.
The output from Registration Sensor RSEN is blocked (H) when the
machine Power Switch is turned ON or a misfeed is reset.
Paper Standby Position Sensor S1 is not blocked (H) within a given
period of time after Take-Up Clutch 1 P1CL has been energized.
Paper Empty Sensor 1 PPS1 is not blocked (H) within a given period
of time after Take-Up Clutch 2 P2CL has been energized.
S1 is not blocked (H) within a given period of time after P1CL has
been energized.
RSEN is not blocked (H) within a given period of time after Separator
Clutch BCL has been energized (after two paper take-up retry
sequences).
RSEN is not unblocked (L) within a given period of time after
Registration Clutch RCL has been energized.
• LCC only:
Synchronizing Roller Sensor PC2 is not unblocked (H) within a given
period of time after Registration Clutch RCL has been turned ON.
• Additional 1st cassette + LCC:
Take-Up Sensor S3 of the additional 1st drawer is not blocked (H)
within a given period of time after Registration Clutch RCL has been
turned ON.
• LCC only:
The period of time is counted from when Synchronizing Roller Clutch
CL1 is energized to when Synchronizing Roller Sensor PC2 is
blocked (L). The difference between the detected length and the
paper size which has been recognized is more than ±20 mm.
• Additional 1st cassette + LCC:
The period of time is counted from when Take-Up Sensor S3 of the
additional 1st drawer is blocked (L) to when it is unblocked (H). The
difference between the detected length and the paper size which has
been recognized is more than ±20 mm.
6-51
Detection Timing
Options
Advertisement
Chapters
Table of Contents
Troubleshooting
