Muratec MFX-2500 Field Engineering Manual page 166

Memory Switch H:0 - Operation
Initial
Switch
Setting
7 0 Display error line
0: No
1: Yes
6 0 Total line monitor
0: No
1: Yes
5 0 Factory use only
4 0 Sort autodialer printout
0: Sort by autodialer location
1: Sort by location ID
3 1 Print check message if power
is lost
0: No
1: Yes
2 1 Print page if error occurs
during memory transmission
0: No
1: Yes
1 1 Print check message
0: No
1: Yes
0 0 Stop printing check message
for a memory transmission by
pressing the stop key
0: No
1: Yes
Memory Switch H:1 - Operation
Initial
Switch
Setting
7 0 Factory use only
6 0 Factory use only
5 1 Print TCR with the original
page during memory
transmission when the result
is NG
0: No
1: Yes
4 0 Factory use only
3 1 Print TCR with the original
page during memory
transmission when the result
is OK
0: No
1: Yes
2 0 Factory use only
1 0 Factory use only
0 0 Display modem speed
0: No
1: Yes
Adjust
The number of error lines contained in the received
data will be shown in the LCD.
Allows fax communication to be heard through the
monitor speaker.
Specifies how entries on autodialer printouts are
sorted.
In the event of two power losses in a 40 hour
period, documents will be lost. When power is
restored, a check message will print.
For easy identification, the first page of a document
stored for memory transmission will print along a
check message if an error occurs during memory
transmission.
To notify the user of an error, a check message can
be printed if a communication error occurs.
Determines if pressing the stop key stop printing the
check message for a memory transmission.
Adjust
For easy identification, the first page of a document
stored for memory transmission will print along a
TCR when the transmission result is NG.
For easy identification, the first page of a document
stored for memory transmission will print along a
TCR when the transmission result is OK.
The transmit/receive speed is displayed in the LCD.
3-95
Usage/Comments
Usage/Comments