Muratec MFX-2500 Field Engineering Manual page 39

2.4.4.1 I/C Drive Mechanism
Drive from the I/C Motor is transmitted via a gear train to the PC Drum and Hopper.
I/C Motor (M1)
Electrical Component
M1
2.4.4.2 Identification and Life of I/C
When the Start key is pressed or the Side Cover is opened and closed, the machine determines whether
the I/C is new or one which has been used previously.
The machine monitors the I/C life by storing in memory the period of time during which the PC Drum has
turned. The data is cleared when a new I/C is installed in the machine.
PC Drum Driver Gear
Hopper Drive Gear
Control Signal
PJ16A-3
See block diagram of the printer.
2-18
ON OFF
L H