Muratec MFX-2500 Field Engineering Manual page 387

Large Capacity Cassette
2. Paper take-up from Lift 2
A. When all sheets of paper have been taken up and fed in from Lift 1, Lift 1 is placed in the top level
position to serve as part of the paper path for paper feeding from Lift 2.
B. When the trailing edge of the last sheet of paper from Lift 1 unblocks Paper Empty Sen-sor 1 PPS1,
both Paper Take-Up Roll 1 and 2 start turning.
C.The sheet of paper is transported by driving both Paper Take-Up Roll 1 and 2 up to a point at which
LCC Take-Up Sensor PPS0 is blocked.
Paper empty sensor 1 PPS1
Paper take-up
roll 2
Lift 2
D.Paper Take-Up Roll 1 is driven to transport the paper located at PPS0 up to a point at which Paper
Standby Position Sensor S1 is blocked. This serves as the standby posi-tion of the paper.
Paper standby position sensor S1
Paper take-up roll 1
Lift 2
Paper take-up
roll 1
Lift 1
Registration sensor RSEN
Lift 1
6-33
LCC take-up sensor PPS0
Vertical transport roller
Separator/Feed roll
Options