Muratec MFX-2500 Field Engineering Manual page 189

Unique Switch h:0 - Operation
Initial
Switch
Setting
7 0 Factory use only
6 0 LCD error message
0: Remains in LCD
1: Returns to standby
5 1 Buzzer/keypad volume
OFF
4 0 0
0
3 1 Factory use only
2 0 Priority mode
0: Copy mode
1: Fax mode
1 0 Factory use only
0 0 Factory use only
Unique Switch h:1 - Operation
Initial
Switch
Setting
7 0 Line monitor in Quick
memory transmission
0: On
1: Off
6 0 Factory use only
5 1 Factory use only
4 0 Factory use only
3 0 Factory use only
2 0 Secure RX document to
polling document
0: No
1: Yes
1 0 RX document to polling
document
0: No
1: Yes
0 0 Factory use only
Unique Switch h:2 --- Factory use only
Adjust
After an error message has printed, the setting of
this switch determines if the error message will
remain in the display.
Low Medium Maximum
0 1 1
1 0 1
Determine if Copy mode or Fax mode appears
when the machine returns to standby with auto
reset.
Note: It is also available when turn the machine on.
Adjust
Retrieve the document received in the SecureMail
box by polling transmission.
Retrieve the document received in the memory by
polling transmission.
3-118
Usage/Comments
Usage/Comments