Muratec MFX-2500 Field Engineering Manual page 190

Unique Switch h:3 - Operation
Initial
Switch
Setting
7 0 Factory use only
6 0 Print consumable order sheet
(drum)
0: No
1: Yes
5 0 Print consumable order sheet
(toner)
0: No
1: Yes
4 0 Factory use only
3 1 Continuous polling daily
0: One day
1: Every days
2 0 F-code Rx message print
0: Yes
1: No
1 1 Factory use only
0 0 Factory use only
Unique Switch h:4 - Operation
Initial
Switch
Setting
7 0 Factory use only
6 0 Factory use only
5 0 When the Department code
feature in ON, it affect to the
manual reception
0: No
1: Yes
4 0 When the Department code
feature in ON, it affect to the
manual transmission
0: No
1: Yes
3 0 Factory use only
2 1 Priority of consumable order
sheet printing
0: Print after the current
printing job completed
1: Print immediately
1 0 Print the transmission time on
TCR
0: Blank
1: Print the transmit time
0 0 Factory use only
Adjust
When the drum cartridge has reached its design life,
print the consumable order sheet out.
When the toner cartridge is empty, print the
consumable sheet out.
Set a time limit for continuous polling.
Print message when the document received in the
F-code box.
Adjust
When this switch set to "1", the machine asks
department code when one using the manual
reception.
When this switch set to "1", the machine asks
department code when one using the manual
transmission.
When the drum cartridge has reached its design life,
or the toner cartridge is empty, the machine prints a
consumable order sheet (see unique switch H:3).
When this switch is set at "0", the machine not print
consumable order sheet until the current printing job
is finished.
When set to "1", the transmission time will be
printed on TCR.
3-119
Usage/Comments
Usage/Comments