Muratec MFX-2500 Field Engineering Manual page 386

Options
C.The Vertical Transport Roller is driven to transport the paper to the machine. When the trailing edge of
the paper being transported by the Vertical Transport Roller unblocks Paper Standby Position Sensor
S1, the subsequent sheet of paper is transported to the standby position and the LCC waits for the next
Paper Take-Up signal to be received.
D.Registration Clutch RCL is deenergized a given period of time after the trailing edge of the paper being
taken up has unblocked Registration Sensor RSEN. The next Paper Take-Up signal is transmitted after
the timer, which is started as the Vertical Transport Roller starts moving for the preceding sheet of
paper, has run out.
Paper standby position sensor S1
Lift 2
E. The steps B to D are repeated to transport paper from Lift 1.
Taking up and feeding two sheets of paper from Lift 1
Copier Signal
Registration Sensor
RSEN
Paper Standby Position
Sensor S1
Registration Clutch
RCL
Separator Clutch
BCL
Take-Up Clutch 1
P1CL
LCC Transport Motor
HMOT
Lift 1
Start Key ON
Operation
Enable Signal Paper Take-Up Signal
ON
OFF
H
L
H
L
ON
OFF
ON
OFF
ON
OFF
ON
OFF
Standby Position
After Lift 1 Has Completed Lifting Motion
Registration sensor RSEN
Vertical transport roller
Paper Take-Up Signal
Standby Position
6-32
Large Capacity Cassette
Standby Position