Synchronizing Rollers - Muratec MFX-2500 Field Engineering Manual

2.4.11 SYNCHRONIZING ROLLERS

The Synchronizing Rollers of this machine are located inside the Right Door. They are easily accessible
for misfeed clearing by just opening the Right Door.
2.4.11.1 Synchronizing Roller Drive Mechanism/Control
The Synchronizing Rollers are turned by the drive from the Main Motor transmitted to the Synchronizing
Clutch.
The rollers are started when the Synchronizing Clutch is deenergized.
Right Synchronizing Roller
Electrical Component
M2
CL1
Main Motor (M2)
Synchronizing Clutch (CL1)
Control Signal
PJ16A-1
See block diagram of the printer.
PJ13A-2A
See block diagram of the printer.
2-39
Left Synchronizing Roller
ON
L
L
OFF
H
H