Muratec MFX-2500 Field Engineering Manual page 66

2.4.15.1 Drive Mechanism
Drive from the Main Motor is transmitted via a gear train to the Right Fusing Roller.
Paper Exit Roller
Main Motor (M2)
Electrical Component
M2
2.4.15.2 Fusing Rollers Pressure Mechanism
To ensure that there is a certain width of area of contact between the Left and Right Fusing Rollers,
pressure springs are installed.
The rollers are held pressed against each other at all times and they are released only when servicing
the machine or replacing parts.
The pressure between the two rollers is approx. 12 kg.
The rollers can be released by moving the Fusing Misfeed Clearing Lever in the direction of the arrow.
Right Fusing Roller
Control Signal
PJ16A-1
See block diagram of printer.
2-45
ON OFF
L H