Muratec MFX-2500 Field Engineering Manual page 289

Hide thumbs Also See for MFX-2500:

Table of Contents

5.2.17 Platen cover assembly

Note: Before disassemble the platen cover assembly, you should write down the number (1, 2 or 3) on the

hinge spacer (see next page). This number will be need when you reassemble the platen cover

1. Remove two screws and harness cover.

2. Disconnect the harness.

3. Remove two screws and platen cover assembly.

Note: You must hold the platen cover assembly.

Harness cover

Platen cover assembly

Hinge spacer

Chapters

Table of Contents