Table of Contents
Advertisement
Configuring Your Machine
Minimum Configuration Requirements
To make the best of this unit, the following configuration is required:
To send faxes:
A PSTN telephone line connection.
Setup the dialing method. (See "User Install" on page 59.)
To send e-mails:
•
TCP/IP network.
•
A SMTP and an optional POP3 server.
To file document(s) via intranet
•
FTP, HTTP, or CIFS Protocol environment.
•
Windows 2000, Windows XP, Windows Vista, Mac OS X, HTTP or FTP server.
Pre-configuration Information
General
Ensure that you have the relevant permission/PIN numbers before commencing.
The factory set passwords/PIN are:
Administrator
PIN
Network (webpage)
NOTE
The administrator password and PIN should be changed and maintained by the
system administrator.
Fax Set Up
Your unit has to be set up properly to allow faxing from the machine. The following
parameters must be set before using the fax function:
•
Time zone
•
Date and time
See "Initial Set Up" on page 66 for details.
NOTE
If you ran the driver installer program from the CD-ROM you may have already
set the time zone, date and time via the Panel Downloader utility.
aaaaaa
000000
user:
admin
password: aaaaaa
Configuring Your Machine > 23
Advertisement
Table of Contents
