Specifying The Network Settings - Muratec MFX-2590 User Manual

Specifying the Network Settings

You can automatically or manually set the IP address of the machine.
Note
If you set the IP address as described below, you can operate the machine from the
Web browser on a computer. Connect to the machine from a Web browser to specify
the required network settings and e-mail settings, etc. For details, refer to Chapter 3,
"Setting the Connection Environment" in the OfficeBridge Guide.
Automatically Setting the IP Address
„
If DHCP (Dynamic Host Configuration Protocol) server is enabled, an IP address is
automatically assigned to the machine.
A gateway address and DNS server address will also be assigned if they are set on the
DHCP server.
Note
The IP address and subnet mask assigned by the DHCP server cannot be changed.
1
Press <Setting>.
2
Press the [Management] tab.
3
If an administrator password is set, press [Admin Password].
If an administrator password is not set, proceed to step 5.
4
Enter the administrator password, and press [Enter].
5
Press [Network Settings].
Connection and Main Settings
1
1-21