Directly Copying Via The Network - Muratec MFX-2590 Administrator's Manual

Directly Copying Via the Network

When directly copying the data for the machine settings via the network, use the screen
of the destination machine.

Directly Copying Via the Network

„
1
Press <Setting>.
2
Press the [Management] tab.
3
If an administrator password is set,
If an administrator password is not set, proceed to step 5.
4
Enter the administrator password, and press [Enter].
5
Press [Mirroring].
6
Press [Direct Copy].
7
Enter the IP address of the machine to copy from, and press [
2-80 Mirroring the Machine Settings
press [Admin Password].
Enter].