Table of Contents
Advertisement
Web OS 10.0 Application Guide
2.
Allocate bandwidth for each string.
To do this, assign a BWM contract to each defined string.
>> # /cfg/slb/layer7/lb/cont <URL path ID> <BWM Contract number>
3.
Configure a real server to handle the cookie.
To add a defined string:
>> # /cfg/slb/real 2/layer7/addlb <URL path ID>
where URL path ID is the identification number of the defined string.
Example:
>> # /cfg/slb/real 2/layer7/addlb 3
4.
Either enable DAM on the switch or configure a proxy IP address on the client port.
N
OTE
To turn on DAM:
>> # /cfg/slb/adv/direct ena
To turn off DAM and configure a Proxy IP address on the client port:
>> # /cfg/slb/adv/direct dis
>> # ../port 2/pip 12.12.12.12
>> # proxy ena
N
OTE
Proxy IP address on the client port, port mapping for URL-based load balancing can be per-
formed.
5.
Enable SLB.
>> # /cfg/slb/on
n
466
Chapter 17: Bandwidth Management
–
If VMA is enabled, you need to configure a unique proxy IP address for each port 1-8.
–
By enabling DAM on the switch or, alternatively, disabling DAM and configuring a
212777-A, February 2002
Advertisement
Table of Contents
