Table of Contents
Advertisement
3.
Define the backbone.
The backbone is always configured as a transit area using areaid 0.0.0.0.
>> Open Shortest Path First # aindex 0
>> OSPF Area (index) 0 # areaid 0.0.0.0
>> OSPF Area (index) 0 # type transit
>> OSPF Area (index) 0 # enable
4.
Define the stub area.
>> OSPF Area (index) 0 # ../aindex 1
>> OSPF Area (index) 1 # areaid 0.0.0.1
>> OSPF Area (index) 1 # type stub
>> OSPF Area (index) 1 # enable
5.
Attach the network interface to the backbone.
>> OSPF Area 1 # ../if 1
>> OSPF Interface 1 # aindex 0
>> OSPF Interface 1 # enable
6.
Attach the network interface to the stub area.
>> OSPF Interface 1 # ../if 2
>> OSPF Interface 2 # aindex 1
>> OSPF Interface 2 # enable
7.
Apply and save the configuration changes.
>> OSPF Interface 2 # apply
>> OSPF Interface 2 # save
212777-A, February 2002
Web OS 10.0 Application Guide
(Select menu for area index 0)
(Set the ID for backbone area 0)
(Define backbone as transit type)
(Enable the area)
(Select menu for area index 1)
(Set the area ID for OSPF area 1)
(Define area as stub type)
(Enable the area)
(Select OSPF menu for IP interface 1)
(Attach network to backbone index)
(Enable the backbone interface)
(Select OSPF menu for IP interface 2)
(Attach network to stub area index)
(Enable the stub area interface)
(Global command to apply all changes)
(Global command to save all changes)
Chapter 4: OSPF
n
85
Advertisement
Table of Contents
